IEI Integration AFL2-12A-HM65 v1.00 - Manual (Page 47)

AFL2-12A-HM65 Series Panel PC
Page 47
4.6 Powering On the System
To power on the system, follow the steps below:
Step 1: Locate the Function and Brightness Up function keys. See Section 1.2.1.1.
Step 2: Hold down the Function and Brightness Up buttons for three seconds to power
on the system. Step 0:
4.7 Powering Off the System
To power off the system, follow the steps below:
Step 1: Locate the Function and Brightness Up function keys. See Section 1.2.1.1.
Step 2: Hold down the Function and Brightness Up buttons for six seconds to power off
the system. Step 0:
4.8 Mounting the System
WARNING!
When mounting the flat bezel panel PC onto an arm, onto the wall or onto a
panel, it is better to have more than one person to help with the installation
to make sure the panel PC does not fall down and get damaged.
The four methods of mounting the AFL2-12A-HM65 are listed below.
 Wall mounting
 Stand mounting
 Arm mounting
 Rack mounting
The four mounting methods are described below.