IEI Integration TANK-6000-C226 - Manual (Page 30)

TANK-6000-C226 Em b e d d e d S ys te m
P a g e 20
in standby mode. Remote power control is perfect for advertising applications since the
broadcasting time for each panel PC can be set individually and controlled remotely. Other
possible application includes:
 Security surveillance
 Point-of-Sale (POS)
 Advertising terminal
3.6 Re s e t th e S ys te m
The reset button enables user to reboot the system when the system is turned on. To
reboot the system, follow the steps below.
S te p 1: Locate the reset button on the rear panel (Figure 3-11).
Figure 3-11: Reset Button Location
S te p 2: Press the reset button. S te p 0:
3.7 Mo u n tin g th e S ys te m with Mo u n tin g Bra c ke ts
To mount the embedded system onto a wall or some other surface using the two mounting
brackets, please follow the steps below.
S te p 1: Turn the embedded system over.
S te p 2: Align the two retention screw holes in each bracket with the corresponding
retention screw holes on the sides of the bottom surface.