Figure 3-8: expansion slot retention screw, Figure 3-9: install pcie card – IEI Integration TANK-6000-C226 User Manual

Page 28

TANK-6000-C226 Em b e d d e d S ys te m

P a g e 18

S te p 2:

Remove the expansion slot cover. The expansion slot cover is secured to the

system with a single retention screw. Remove the screw.

Figure 3-8: Expansion Slot Retention Screw

S te p 3:

Insert the expansion card. Align the PCIe expansion card edge connector with

the PCIe expansion slot on the PCIe riser card. Gently insert the PCIe card into

the PCIe expansion slot.

S te p 4:

Secure the expansion card. Once the PCIe card is correctly installed in the

system, reinsert the previously removed retention screw to secure the card to

the I/O interface panel.

S te p 0:

Figure 3-9: Install PCIe Card