IEI Integration ECW-281B-N270-WT v3.01 - Manual (Page 182)

ECW-281B/281B2-R30/N270 Embedded System
Page 167
Step 6: In the following window, select a SATA controller mode used in the system. Then
press <Enter>. The user can now start using the SATA HDD.
Step 7: After pressing , the system will get into the recovery tool setup menu.
Continue to follow the setup procedure from Step 4 in Section B.2.2 Create
Partitions to finish the whole setup process. Step 0:
B.7.2 System Memory Requirement
To be able to access the recovery tool by pressing <F3> while booting up the system,
please make sure to have enough system memory. The minimum memory requirement is
listed below.
Using Award BIOS: 128 MB system memory
Using AMI BIOS: 512 MB system memory.