IEI Integration ECW-281B-N270-WT v3.01 - Manual (Page 137)

ECW-281B/281B2-R30/N270 Embedded System
Page 122
WARNING:
The precautions outlined in this chapter should be strictly followed.
Failure to follow these precautions may result in permanent damage to
the ECW-281B/281B2-R30/N270.
A.1 Safety Precautions
Please follow the safety precautions outlined in the sections that follow:
A.1.1 General Safety Precautions
Please ensure the following safety precautions are adhered to at all times.
Follow the electrostatic precautions outlined below whenever the
ECW-281B/281B2-R30/N270 is opened.
Make sure the power is turned off and the power cord is disconnected
whenever the ECW-281B/281B2-R30/N270 is being installed, moved or
modified.
Do not apply voltage levels that exceed the specified voltage range.
Doing so may cause fire and/or an electrical shock.
Electric shocks can occur if the ECW-281B/281B2-R30/N270 chassis is
opened when the ECW-281B/281B2-R30/N270 is running.
Do not drop or insert any objects into the ventilation openings of the
ECW-281B/281B2-R30/N270.
If considerable amounts of dust, water, or fluids enter the
ECW-281B/281B2-R30/N270 , turn off the power supply immediately, unplug
the power cord, and contact the ECW-281B/281B2-R30/N270 vendor.
DO NOT:
o Drop the ECW-281B/281B2-R30/N270 against a hard surface.
o In a site where the ambient temperature exceeds the rated temperature