Use dns, Primary/secondary dns ip address, Procedure – ZOLL R Series Monitor Defibrillator Rev K CONFIGURATION User Manual
Page 63: Use dns setting is set to yes

Wi-Fi Settings (Optional)
9650-0902-01 Rev. K
57
Use DNS
This setting allows you to specify whether to use a DNS to obtain the server IP address from the
server name.
Values are as follows:
Primary/Secondary DNS IP Address
This setting allows you to specify the Primary and Secondary IP address of the DNS server to
use if the following conditions are met:
•
Use DNS setting is set to Yes
•
DHCP/Static IP setting is set to Static IP
Values are as follows:
Procedure
Follow these steps to set up a Primary DNS IP Address.
Possible Values:
Yes, No
Default:
Yes
Possible Values:
XXX.XXX.XXX.XXX where XXX is 000 to 255
Default:
192.168.100.2
Step
Action
1.
From the Select Configuration Categories screen,
select Wi-Fi, then press the Enter softkey.
The Wi-Fi Configuration screen appears.
2.
Press the Next Item softkey until the
Primary DNS IP Address appears and press the
Change Value softkey.
The Set Primary DNS IP Address screen
appears.
Next
Item
Prev
Item
System Configuration
Wi-Fi Configuration
Defib History
Transfer Mode
DHCP/
Static IP
Both
Static IP
Main
Menu
Exit
Config
Category
List
Change
Value
Full Disclosure
Transfer Mode
Server
Page 1 of 7
System Configuration
Set Primary DNS IP Address
1 9 2 . 1 6 8 . 1 0 0 . 2
Return
Enter
Char
1
Cancel
4
7
2
5
8
3
6
9
0
<
<
.