Warner Electric PCBC-1525_1225 - Manual (Page 16)

16 Warner Electric • 800-825-9050 P-214 • 819-0518
PCB-1225/1000 Clutch/Brake – Normal Duty
Shaft Size .500 – 2.500
Static Torque Clutch 465 lb. ft.
Static Torque Brake 240 lb. ft.
Maximum Speed 3,000 rpm
Standard Voltage D.C. 6, 24, 90
All dimensions are nominal unless otherwise noted.
* Mounting holes are within .010 of true position
relative to pilot diameter.
Customer Shall Maintain:
1. Concentricity of brake mounting pilot diameter
with mounting shaft within .010 T.I.R.
2. Squareness of brake magnet mounting face
with mounting shaft within .006 T.I.R. measured
at magnet mounting bolt circle.
4.125 Dia.
.593
.562
1.453
.562
Max.
6.531
5.750
.171
Max.
1.546
.921
.093 When New
2.906
5/16-
18
UNC-
3A
1.750
1.906
13.140
Max. 12.625
Dia.
5.877
Dia. 4.625
Dia.
6.250
Max.
.093 When New
Magnet View
(Inside & Outside Mounted)
11.500/11.498 Pilot Dia.
.358/.338 dia.
(8) holes
equally
spaced on
10.625 dia.*
Removable plug in
ends for 1/2" conduit.
.358/.338 dia. (6) holes
equally spaced on 6.125
dia.*
5.378/5.376 Pilot
Dia.
3.750
Armature View
See page 28 for
details on Bushings.
See page 5 for details on
Drive Pin mountings.
7.687
1.640