beautypg.com

Use and confirm by pressing the, Enter button, Keypad push-buttons – TREND NX Variable Speed Drives User Manual

Page 86: Button descriptions

background image

CONTROL KEYPAD

vacon • 69

24-hour support +358 (0)40 837 1150 • Email: [email protected]

7

7.2 Keypad

push-buttons

The Vacon alphanumeric control keypad features 9 push-buttons that are used for the control of the
frequency converter (and motor), parameter setting and value monitoring.

Figure 7-2. Keypad push-buttons

7.2.1 Button

descriptions


reset

=

This button is used to reset active faults (see Chapter 7.3.4).


select

=

This button is used to switch between two latest displays. May be useful when you
want to see how the changed new value influences some other value.


enter

=

The Enter button serves for:

1) confirmation of selections

2) fault history reset (2…3 seconds)

=

Browser button up

Browse the main menu and the pages of different submenus.

Edit

values.

=

Browser button down

Browse the main menu and the pages of different submenus.

Edit

values.

=

Menu button left

Move backward in menu.

Move cursor left (in

parameter menu

).

Exit edit mode.

Hold down for 3 seconds to return to main menu.

=

Menu button right

Move forward in menu.

Move cursor right (in

parameter menu

).

Enter edit mode.

=

Start

button.

Pressing this button starts the motor if the keypad is the active control place. See
Chapter 7.3.3.


=

Stop

button.

Pressing this button stops the motor (unless disabled by parameter R3.4/R3.6).
See Chapter 7.3.3.

3

4

start

stop

+

-