beautypg.com

Receipt of delivery, Type designation code, Drive modified – TREND NX Variable Speed Drives User Manual

Page 31

background image

14 • vacon

RECEIPT OF DELIVERY

Tel. +358 (0)201 2121 • Fax +358 (0)201 212 205

3

3.

RECEIPT OF DELIVERY

Vacon NX frequency converters have undergone scrupulous tests and quality checks at the factory before
they are delivered to the customer. However, after unpacking the product, check that no signs of transport
damages are to be found on the product and that the delivery is complete (compare the type designation of
the product to the code below, Figure 3-1.

Should the drive have been damaged during the shipping, please contact primarily the cargo insurance
company or the carrier.

If the delivery does not correspond to your order, contact the supplier immediately.

In the small plastic bag included in the delivery you will find a silver

Drive modified

sticker. The purpose of

the sticker is to notify the service personnel about the modifications made in the frequency converter.
Attach the sticker on the side of the frequency converter to avoid losing it. Should the frequency converter
be later modified (option board added, IP or EMC protection level changed), mark the change in the sticker.

3.1

Type designation code

Figure 3-1. Vacon NX type designation code


NXS

0000

A 2 H 1 SSV A1A20000C3

5

Product range: NXS = standard, NXP = high-performance

Nominal current (low overload)

0007 = 7 A, 0022 = 22 A, 0205 = 205 A etc.

Nominal mains voltage (3-phase):

2 = 208–240Vac, 5 = 380–500Vac, 6 = 525–690Vac (All 3-phase)

Control keypad:

A = standard (alpha-numeric)
B = no local control keypad
F = dummy keypad
G = graphic display

Enclosure class:

0 = IP00 (FR9 only), 2 = IP21/NEMA 1, 3 = IP21/NEMA 1 (cabinet-mounted)
5 = IP54 (NEMA 12), 7 = IP54/NEMA 12

EMC emission level:

C = fulfils standard EN61800-3+A11, 1st environment (unrestr.)
H = fulfils standard EN61800-3+A11, 1st environment

restricted distribution, 2nd environment

L = fulfils standard EN61800-3+A11, 2nd environment, restr. distr.
T = fulfils standard EN61800-3 for IT networks
N = No EMC emission protection

Brake chopper

0 = no brake chopper
1 = internal brake chopper
2 = internal brake chopper and resistor

Option boards; each slot is represented by two characters where:

A = basic I/O board, B = expander I/O board,
C = fieldbus board, D = special board

Hardware modifications; Supply - Mounting - Boards

Sxx = 6-pulse connection (FR4 to FR14)
Bxx = Additional DC-connection (>FR8)
Jxx = FR10...12 stand-alone with main switch and DC-link terminals

xSx = Air-cooled drive

xxS = Standard boards (FR4 to FR8)
xxV = Varnished boards (FR4 to FR8)
xxF = Standard boards (FR9 to FR14)
xxG = Varnished boards (FR9 to FR14)
xxA = Standard boards (FR10 to FR12 standalone drives)
xxB = Varnished boards (FR10 to FR12 standalone drives)

Note: Ask factory for other possible installation combinations.