beautypg.com

Security, R 7.3.6.5, C1 c3 – TREND NX Variable Speed Drives User Manual

Page 108: P1 p6, 0 hz, Not in use

background image

CONTROL KEYPAD

vacon • 91

24-hour support +358 (0)40 837 1150 • Email: [email protected]

7

Figure 7-13. Parameter comparison

7.3.6.5 Security

NOTE: The

Security submenu

is protected with a password. Store the password in a safe place!

Password (S6.5.1)

The application selection can be protected against unauthorised changes with the Password function
(S6.5.1).
By default, the password function is not in use. If you want to activate the function, enter the edit mode by
pushing the

Menu button right

. A blinking zero appears in the display and now you can set a password with

the

Browser buttons

. The password can be any number between 1 and 65535.


Note that you can also set the password by digits. In the edit mode, push the

Menu button right

once again

and another zero appears on the display. Now set first the units. Then push the

Menu button left

and you

can set the tens etc. Finally, confirm the password setting with the

Enter button

. After this, you have to wait

until the

Timeout time (P6.6.3)

(see page 94) has expired before the password function is activated.

If you now try to change applications or the password itself you will be prompted for the current password.
The password will be entered with the

Browser buttons

.

Deactivate the password function by entering the value 0.

Figure 7-14. Password setting

Note! Store the password in a secure location! No changes can be made unless a valid password is
entered!

C1 C3

READY

READY

READY

0

enter

P1 P6

P2.1.2= 50.0

READY

20.0 Hz

P2.1.2= 50.0

READY

20.0 Hz

ParamComparison

Set1

Set1

CONFIRM CHANGE

EDIT VALUE

OR

READY

I/Oterm

0

READY

I/Oterm

enter

00

READY

I/Oterm

enter

Password

Not in use

Password

Password

OR: