TREND NX Variable Speed Drives User Manual
Page 129
Basic Application
vacon • 11
24-hour support +358 (0)40 837 1150 • Email: [email protected]
1
P2.20
Automatic restart
0
1
0
731
0=Disabled
1=Enabled
Table 1-3. Basic parameters G2.1
1.4.3
Keypad control (Control keypad: Menu M3)
The parameters for the selection of control place and direction on the keypad are listed below. See
the Keypad control menu in the product's User's Manual (Trend Installation Manual Part3).
Code
Parameter
Min
Max
Unit
Default
Cust
ID
Note
P3.1
Control place
1 3 1
125
1=I/O terminal
2=Keypad
3=Fieldbus
R3.2
Keypad reference
Par. 2.1
Par. 2.2
Hz
P3.3
Direction (on
keypad)
0 1 0
123
Reverse request activated
from the panel
R3.4
Stop button
0 1 1
114
0=Limited function of Stop
button
1=Stop button always
enabled
Table 1-4. Keypad control parameters, M3
1.4.4
System menu (Control keypad: Menu M6)
For parameters and functions related to the general use of the frequency converter, such as
application and language selection, customised parameter sets or information about the hardware
and software, see the product's User's Manual (Trend Installation Manual Part3).
1.4.5
Expander boards (Control keypad: Menu M7)
The M7 menu shows the expander and option boards attached to the control board and board-
related information. For more information, see the product's User's Manual (Trend Installation
Manual Part3).