TREND NX Variable Speed Drives - Manual (Page 114)

CONTROL KEYPAD vacon • 97
24-hour support +358 (0)40 837 1150 • Email: [email protected]
7
Trip counters (S6.8.2)
Trip counters (menu S6.8.2) are counters the values of which can be reset i.e. restored to zero. You have
the following resettable counters at your disposal. See Table 7-7 for examples.
Note! The trip counters run only when the motor is running.
Page Counter
T6.8.2.1 MWh counter
T6.8.2.3 Operation day counter
T6.8.2.4 Operation hour counter
Table 7-8. Resettable counters
The counters can be reset on pages 6.8.2.2 (Clear MWh counter) and 6.8.2.5 (Clear Operation time counter) .
Example: When you want to reset the operation counters you should do the following:
Figure 7-24. Counter reset
Software (S6.8.3)
The Software information page includes information on the following frequency converter software related
topics:
Page Content
6.8.3.1 Software package
6.8.3.2 System software version
6.8.3.3 Firmware interface
6.8.3.4 System load
Table 7-9. Software information pages
T1 T5
READY READY READY
enter
READY READY
STOP STOP
STOP STOP READY STOP
Trip counters Clr Optime cntr Clr Optime cntr
Not reset Not reset
Clr Optime cntr
Reset
Clr Optime cntr
Reset
Clr Optime cntr
Not reset