beautypg.com

Copy parameters, Apter 7.3.6.3, S1 s11 – TREND NX Variable Speed Drives User Manual

Page 105: Standard, Multi-step, System menu application, Application

background image

88 • vacon

CONTROL KEYPAD

Tel. +358 (0)201 2121 • Fax +358 (0)201 212 205

7

Figure 7-10. Change of application

7.3.6.3 Copy

parameters

The parameter copy function is used when the operator wants to copy one or all parameter groups from
one drive to another or to store parameter sets in the internal memory of the converter. All the parameter
groups are first

uploaded

to the keypad, then the keypad is connected to another drive and then the

parameter groups are

downloaded

to it (or possibly back to the same drive).


Before any parameters can successfully be copied from one drive to another the drive has to be stopped
when the parameters are downloaded to it:

The parameter copy menu (S6.3) embodies four functions:

Parameter sets (S6.3.1)

The Vacon NX frequency converter features a possibility for the user to load back the factory default
parameter values and to store and load two customised parameter sets (all parameters included in the
application).

On

Parameter sets

page (S6.3.1), push the

Menu button right

to enter the

Edit menu

. The text

LoadFactDef

begins to blink and you can confirm the loading of factory defaults by pushing the

Enter button

. The drive

resets automatically.
Alternatively you can choose any other of the storing or loading functions with the

Browser buttons

.

Confirm with the

Enter button

. Wait until 'OK' appears on the display.

S1 S11

STOP READY

I/Oterm

STOP READY

I/Oterm

STOP READY

I/Oterm

enter

STOP READY

I/Oterm

System Menu

Application

Standard

Application

Standard

Application

Multi-step