beautypg.com

Keypad settings, Changeenable, Changeenable changedisable – TREND NX Variable Speed Drives User Manual

Page 110: P1 p5, Multimon. items, Keypad settings default page

background image

CONTROL KEYPAD

vacon • 93

24-hour support +358 (0)40 837 1150 • Email: [email protected]

7

Multimonitoring items (P6.5.4)

Vacon alpha-numeric keypad features a display where you can monitor even three actual values at the
same time (see chapter 7.3.1 and chapter

Monitoring values

in the manual of the application you are

using). On page P6.5.4 of the System Menu you can define if it is possible for the operator to replace the
values monitored with other values. See below.

Figure 7-17. Enabling the change of multimonitoring items

7.3.6.6 Keypad

settings

In the Keypad settings submenu under the

System menu

you can further customise your frequency

converter operator interface.
Locate the Keypad settings submenu (S6.6). Under the submenu, there are four pages (P#) associated
with the keypad operation:

Figure 7-18. Keypad settings submenu

Default page (P6.6.1)

Here you can set the location (page) to which the display automatically moves as the

Timeout time

(see

below) has expired or as the power is switched on to the keypad.

If the

Default Page

value is 0 the function is not activated, i.e. the last displayed page remains on the

keypad display. Press the

Menu button right

once to enter the edit mode. Change the number of the Main

menu with the

Browser buttons

. Pressing the

Menu button right

once again makes you able to edit the

number of the submenu/page. If the page you want to move to by default is at the third level repeat the
procedure. Confirm the new default page value with the

Enter button

. You can return to the previous step

anytime by pushing the

Menu button left

.

Figure 7-19. Default page function

0.

READY

I/Oterm

READY

I/Oterm

READY

I/Oterm

0.

1.

enter

Default page

REPEAT TO SET

DEFAULT SUBMENU/PAGE
CANCEL

Default page

Default page

CONFIRM CHANGE

READY

I/Oterm

READY

I/Oterm

enter

READY

I/Oterm

Multimon. items

ChangeEnable

Multimon. items

Multimon. items

ChangeEnable

ChangeDisable

P1 P5

READY

I/Oterm

0.

READY

I/Oterm

Keypad settings

Default page