Frequency hopping – Teledyne LeCroy BTTracer_Trainer - BTTracer Users Manual User Manual
Page 91

81
BTTracer Protocol Analyzer User’s Manual
CATC
SW Version 2.20
Frequency Hopping
Stay with Basic Hopping - Configures the probe to use the Basic Hopping
sequence as defined by the Bluetooth 1.1 specification.
Follow AFH - Configures the probe to use the Adaptive Frequency Hopping
sequence as defined by the Bluetooth 1.2 specification.
Set... - Opens a dialog box for selecting the channels you would like
BTTracer to use.
LT_ADDr to Follow: Select devices to be followed.
Start with Predefined Channel Map: Tells BTTracer whether
to use the selected channel map from the table. Select an AFH
sequence from the list, check Start with Predefined Channel
Map, then click OK.
Add ...: Opens a dialog box for selecting multiple channels. You
can shift-click or control-click to select or deselect multiple
channels. Add a name to the box marked Name and then click OK
to close the dialog box and keep your selection.
Edit ...: Opens the dialog box shown above and lets you change the
current settings.
Delete: Deletes the selected AFH sequence.
- 6Zi Rackmount (12 pages)
- HDO Oscilloscope Rackmount (14 pages)
- LSIB-1 Host Interfaces (44 pages)
- OC1021 Oscilloscope Cart (9 pages)
- OC1024 Oscilloscope Cart (10 pages)
- OC910 Oscilloscope Cart (2 pages)
- TTL-AUX-OUT (1 page)
- WaveJet Rackmount (1 page)
- Zi Oscilloscope Rackmount (12 pages)
- USB2-GPIB (12 pages)
- WM8Zi-2X80GS (2 pages)
- WR6ZI-8CH-SYNCH (6 pages)
- Zi Oscilloscope Synchronization ProBus Module (Zi-8CH-SYNCH) (16 pages)
- LogicStudio (42 pages)
- WaveSurfer MXs-B Getting Started Manual (126 pages)
- WaveSurfer MXs-B Quick Reference Guide (16 pages)
- X-STREAM OSCILLOSCOPES Remote Control (305 pages)
- WS-GPIB (12 pages)
- PXA125 (219 pages)
- PXD Series (42 pages)
- PXD222 (38 pages)
- Oscilloscope System Recovery (8 pages)
- LabMaster 9Zi-A (264 pages)
- LabMaster 10Zi Rackmount (8 pages)
- LabMaster 10Zi Getting Started Manual (236 pages)
- LabMaster 10Zi Operators Manual (198 pages)
- WaveAce 1000_2000 (108 pages)
- WaveAce 1000_2000 Remote Control (92 pages)
- WaveRunner Xi-A Quick Reference Guide (16 pages)
- WaveRunner XI SERIES Operator’s Manual (233 pages)
- WaveMaster Automation Command (667 pages)
- WaveMaster 8 Zi_Zi-A (190 pages)
- WaveMaster 8000A (46 pages)
- WavePro 7 Zi_Zi-A (188 pages)
- WaveExpert series Automation Manual (285 pages)
- WaveExpert 9000_NRO9000_SDA100G Getting Started Manual (50 pages)
- WaveExpert 100H Operators Manual (348 pages)
- WaveRunner Automation Command (460 pages)
- WaveRunner Xi-A Getting Started Manual (128 pages)
- WaveRunner 6 Zi and 12-Bit HRO Getting Started Manual (198 pages)
- WaveRunner 6 Zi Quick Reference Guide (20 pages)
- WaveRunner 6 Zi-ExtRef-IN_OUT (2 pages)
- WaveSurfer Automation Command (226 pages)
- HDO 4000 Getting Started Guide (48 pages)
- HDO Removable Hard Drive (2 pages)