Teledyne LeCroy BTTracer_Trainer - BTTracer Users Manual - Manual (Page 73)

63
BTTracer Protocol Analyzer User’s Manual CATC SW Version 2.20
If BTTracer finds Bluetooth devices, it will display the following
message:
Check the Device List to see if BTTracer found all of the devices in your
piconet. If you feel that the list is incomplete, you can close this window
and press the button marked Repeat. This will cause BTTracer to repeat
the General Inquiry and recollect information on local Bluetooth devices.
Step 9 Press Next to advance to the next screen.
The following screen will prompt you for the Master device’s address.
The address can be selected from the menu or typed into the box: