Teledyne LeCroy BTTracer_Trainer - BTTracer Users Manual - Manual (Page 122)

112
BTTracer Protocol Analyzer User’s Manual CATC SW Version 2.20
Step 3
Click on the other event.
The arrow should connect to the second button and the second button
should instantly change locations to the center section of the window.
6.9 Saving Recording Options
To complete your Recording Options settings, use the features at the bottom
of the Recording Options screen. These features remain the same no matter
which of the three Recording Options screens you are working in.
• Click Save to save the currently specified Recording Options for
use in future recording sessions. Any file name can be specified,
though use of the .rec is recommended; if no extension is
specified, .rec is added by default.
• Click Load to load a previously saved *.rec file, thus restoring a
previous set of Recording Options. You can also load the
recording options from trace files.
• The Save as Default function is equivalent to the Save function,
specifying the file name default.rec. Whenever you start up the
Analyzer, it automatically loads the default.rec file if one exists.
• Click OK to apply any changes and close this dialog box.
• Click Cancel to cancel any immediate changes you have made
and exit the Recording Options menu.
6.10 Recording Bluetooth Traffic
To start a recording once the appropriate Recording Options have been set,
Step 1
Select Start under Record on the Menu Bar