Teledyne LeCroy WaveSurfer Automation Command - Manual (Page 222)

Automation Command and Query Reference Manual - Processor Reference
SigFindLevel Action
Causes the engine to find a suitable level for either SigLevelType ("Absolute"or "Percent")
Description
SigHysteresis Double
From 0 to 10 step 0.1 Range
Sets/Queries the hysteresis range for the signal.
Description
' Visual Basic Script
Set app = CreateObject("LeCroy.XStreamDSO")
' Set parameter P3 to phase difference.
app.Measure.P3.ParamEngine = "Phase"
' Set the signal hysteresis in graticule divisions.
app.Measure.P3.Operator.SigHysteresis = 0.7
Example
SigLevelType Enum
Sets/Queries which level to use "Percent" or "Absolute" for transitions on the signal
Description
Values
Absolute
Percent
SigPercentLevel Double
From 0 to 100 step 1 Range
Sets/Queries the test level for the signal in percent.
Description
SigSlope Enum
Sets/Queries the polarity of the measured signal transitions.
Description
Values
Both
Neg
Pos
ROOTMEANSQUARE
app.Measure.Px.Operator (ParamEngine = "RootMeanSquare")
Cyclic Bool
Cyclic Bool
2-13
918499 RevA