Teledyne LeCroy WaveSurfer Automation Command - Manual (Page 199)

Automation Command and Query Reference Manual - Control Reference
Month Integer
From 1 to 12 step 1 Range
Sets/Queries the month setting of the real-time clock as a number.
The value will not be accepted by the clock until app.Utility.DateTimeSetup.Validate
is sent. All time/date controls are validated at the same time.
Description
' Visual Basic Script
Set app = CreateObject("LeCroy.XStreamDSO")
' Set the month as August.
app.Utility.DateTimeSetup.Month = 8
app.Utility.DateTimeSetup.Validate
Example
Second Integer
From 0 to 59 step 1 Range
Sets/Queries the seconds setting of the real-time clock as a number.
The value will not be accepted by the clock until app.Utility.DateTimeSetup.Validate
is sent. All time/date controls are validated at the same time.
Description
' Visual Basic Script
Set app = CreateObject("LeCroy.XStreamDSO")
' Set the seconds as 55.
app.Utility.DateTimeSetup.Second = 55
app.Utility.DateTimeSetup.Validate
Example
SetFromSNTP Action
Sets the real time clock from the simple network time protocol.
Description
' Visual Basic Script
Set app = CreateObject("LeCroy.XStreamDSO")
' Set the real time clock from the simple network time protocol.
app.Utility.DateTimeSetup.SetFromSNTP
Example
1-192
918499 RevA