Teledyne LeCroy WaveSurfer Automation Command - Manual (Page 20)

Automation Command and Query Reference Manual - Control Reference
BandwidthLimit Enum
Sets/Queries the bandwidth limit for input channel Cx, in Hz. Note that this control is an enum, and
therefore requires a string value, and not a scalar value.
Note that bandwidth limit choices vary between DSO models.
Description
' Visual Basic Script
Set app = CreateObject("LeCroy.XStreamDSO")
' Set the bandwidth limit for C2 to 20 MHz.
app.Acquisition.C2.BandwidthLimit = "20MHz"
Example
Values
200MHz
20MHz
Full
ClearSweeps Action
Clears all accumulated average data and persistence data for this channel. See
app.Acquisition.ClearSweeps for a control that clears accumulated data for channels 1..4, or
app.ClearSweeps for a control that clears accumulated data for all subsystems (including
Math/Measure/Display, etc.)
Description
' Visual Basic Script
Set app = CreateObject("LeCroy.XStreamDSO")
' Reset channel C1
app.Acquisition.C1.ClearSweeps
' Reset channels C1..C4
app.Acquisition.ClearSweeps
Example
1-13
918499 RevA