Teledyne LeCroy WaveAce 1000_2000 - Manual (Page 7)

Operator’s Manual
922131-00 Rev A 1
Welcome
Thank you for purchasing a Teledyne LeCroy WaveAce product. This
Operator's Manual includes important safety and installation information for
your WaveAce 1000/2000 Oscilloscope, along with operating procedures for
capturing, viewing, and analyzing waveforms.
This WaveAce Operator's Manual is organized in the following manner:
 Hardware (physical features) and Basic Controls
 Viewing Waveforms, includes instructions on setting up the Display
 Vertical and Horizontal Settings, Sampling Modes, and Triggering
 Analyzing Waveforms using parameter Measurements, Math functions,
and Reference Waveforms
 Saving and Recalling oscilloscope setups, waveforms, .CSV files, and
waveform images. This section also provides procedures to recall
factory settings.
 Reference section including certification and contact information.
When oscilloscope is delivered, verify that all items on the packing list or
invoice copy have been shipped to you. Contact your nearest Teledyne LeCroy
customer service center or national distributor if anything is missing or
damaged. If you do not contact us immediately, we cannot be responsible for
replacement. If you have any problems with your product, please refer to
Contact Teledyne LeCroy for Support
at the end of this
Operator's Manual
. You can also
refer to additional support materials at teledynelecroy.com .
We truly hope these materials provide increased comprehension when using
Teledyne LeCroy's fine products.
Sincerely,
David C. Graef
Teledyne LeCroy Corporation
Vice President and Chief Technology Officer