Delay measurement parameters – Teledyne LeCroy WaveAce 1000_2000 User Manual
Page 53

Operator’s Manual
922131-00 Rev A
47
Delay Measurement Parameters
First select a Source Channel for your Delay measurement parameter by
pressing the Source option button. Now, use the Type option button to choose
from the following Delay measurement parameters for your selected source.
Phase
- Amount one waveform leads or lags another in time
expressed in degrees, where 360 degrees is one waveform cycle.
FRR
- Time between the first rising edge of Source 1 and the first
rising edge of Source 2.
FRF
- Time between the first rising edge of Source 1 and the first
falling edge of Source 2.
FFR
- Time between the first falling edge of Source 1 and the
first rising edge of Source 2.
FFF
- Time between the first falling edge of Source 1 and the first
falling edge of Source 2.
LRR
- Time between the first rising edge of Source 1 and the last
rising edge of Source 2.
LRF
- Time between the first rising edge of Source 1 and the last
falling edge of Source 2.
LFR
- Time between the first falling edge of Source 1 and the last
rising edge of Source 2.
LFF
- Time between the first falling edge of Source 1 and the last
falling edge of Source 2.