Teledyne LeCroy WaveAce 1000_2000 - Manual (Page 66)

WaveAce 1000/2000
60 922131-00 Rev A
3. Print or Save your .BMP pictures to a USB memory device using the
following methods.
Printing Directly to a Printer

Press the Print Key option button and select Print Picture. Be
sure a printer is connected to your WaveAce oscilloscope.

Now, press the Print option button on your oscilloscope.
Saving .BMP Pictures to a USB Memory Device

Insert the USB memory device, press the Print Key option button
and select Save Picture.

Press the Save option button and the SAVE ALL screen opens
showing Directorys by default. Finish saving your picture using
the following instructions in Using the SAVE ALL Screen (on page
66).

Switch to the SAVE ALL - Files Menu - covered in Using the
SAVE ALL Screen (on page 66).

Name and Confirm your file using the steps explained in
Creating Folders and Files - also covered in Using the
SAVE ALL Screen (on page 66).
NOTE:

As explained in Utility Menu (on page 69), set the Back USB option
button to Computer if you want to save bitmap pictures or Printer if
you want to print the pictures.

With either Save or Print Picture chosen from the Print Key option
button (and corresponding options setup as explained in Print Setup
(on page 78)), simply press the Print front panel button to instantly
execute your selected function.

The Recall option is excluded from Save/Recall menus when Picture or
CSV is selected as the Type.

The Load option is disabled (grayed-out) on menus inside the SAVE
ALL screen when Pictures or CSV file types are selected as Type.