Teledyne LeCroy WaveAce 1000_2000 - Manual (Page 33)

Operator’s Manual
922131-00 Rev A 27
3. Press the Invert option button on page 2/3, and then select On.
Setting the Digital Filter
You can choose from the following digital filter types:

Low Pass Filter (LPF)

High Pass Filter (HPF)

Band Pass Filter (BPF)

Band Stop Filter
Use the following steps to set the digital filter.
1. Turn on the digital filter by pressing the desired channel button - CH1 or
CH2 (or CH3 or 4 on 4 channel models).
2. On the channel menu, press the Next Page option button, showing
page 2/3.
3. Press the Filter option button on page 2/3. The Filter menu opens.
4. Press the Filter option button and select On.