Foredom Series SR - Manual (Page 19)

19
35 Refine the cheek pouch and eye canal using
the same Typhoon ® cylinder or sleeve.
36 Remove wood from the front and back of
the neck and the “v” on the back using a
Typhoon
® flame.
37 Re-sketch the bill, refine the taper, and
round the tip of bill using a 1/4” shank blue
Typhoon
® cylinder or sleeve.
38 Round the sharp edge on the top of the
head using the same Typhoon ® sleeve or cylinder.
39 Remove wood from under the front one-
third of bill using the same sleeve or cylinder.
This cut creates the uplift near the tip of the bill.
40 Use the same sleeve or cylinder to round
the back to the “v” and to the side pocket on
each side.