Foredom Series SR - Manual (Page 16)

16
19 Round the area around the chest and neck
by removing wood using a 1/4” shank Typhoon ®
cylinder or sanding sleeve.
20 Round the rump using the same Typhoon ®
sleeve or cylinder.
21 Re-sketch the side pockets using a soft
lead pencil or felt tip pen.
22 Sketch the primaries and tertials. Refer to a
pattern or a book of duck reference materials.
18 Round the side of the body. The high point
on the side is about 3/16” wide and is at about
the middle of the side. From the high point, the
side generally rounds to the base and to the side-
pocket layout line.
17 Round the back to the side-pocket using a
1/4” shank Typhoon ® cylinder or sanding sleeve.
Maintain a slight curve.