Foredom Series SR - Manual (Page 15)

15
11 Use a 1/4” shank Typhoon ® cylinder or the
flat side of a large Typhoon ball nose to remove
wood from the bill. Maintain the width of the bill
at 3/8” Do not round the bill at this step.
12 Remove wood around the cheek pouch
using a 1/4” shank Typhoon ® sphere or ball nose.
Maintain the cut outside of the line.
13 Round the head and neck using the same
bur. Remember there are no square birds or
mammals in nature.
14 Move to the body and continue to remove
wood from the lower neck using the 1/4” shank
Typhoon
® sphere or ball nose.
16 Remove wood around the side-pocket lay-
out lines using a 1/4” shank Typhoon ® sphere or
ball nose.
15 Sketch the side-pockets on the body.