IAI America IX-NNN12040 User Manual
Page 37
2. Installation
31
[1] Handling of the Carton
x
Do not damage or drop. The package is not applied with any special treatment that enables it
to resist an impact caused by a drop or crash.
x
An operator should never attempt to carry on their own. Also, use an appropriate way for
transportation.
x
When placing the package, settle it horizontally following the posture instruction of the
package.
x
Do not step or sit on the package.
x
Do not put any load that may cause a deformation or breakage of the package.
[2] Handling after Unpackaged
x
Carry the robot using the eyebolts to hang on a hook.
When pulling up the robot, hold the 1
st
arm, 2
nd
arm or the base to keep the robot horizontal
and pull it up slowly.
x
When carrying a robot, it has to be done by a person who is certified for sling work and crane
operation.
x
Carry the robot with stoppers attached on J1 and J2 axes.
x
Do not attempt to hold the Z-axes or 2
nd
arm for transportation.
x
Do not apply too much force on each part of the robot.
Arm 2
Vertical Axis
Base
Arm 1
Notice:
After the transportation work is finished, detach the eyebolts for hanging and
keep them in a place you would not lose them.
After removing the eye bolts, cover up the tapped holes with the (enclosed) hex
socket head screws sized M10u15.