IAI America LSAS-N15HM - Manual (Page 70)

13. Replacement/Adjustment of Stainless Sheet
54
[Procedure]
1) Remove the mounting screws of the slider cover and remove the slider cover.
When the slider cover is removed
Caution: Slowly and carefully remove the slider cover. In the case of a ceiling hanging, vertical or
horizontal sideway installation, place a plastic bag or similar underneath the slider cover
so that the coil springs won't be lost if they fall off.
Coil spring
Roller section
Slider
Coil spring
Coil spring Coil spring
Roller section