IAI America LSAS-N15HM - Manual (Page 53)

9. Installation
37
9.4 Installing a Connector Box Using T-slots: N10SS, N10SM, N15SS, N15SM,
N15HS, N15HM
T-slots (for M4) are provided on the side faces on the main bodies of the N10SS, N10SM, N15SS, N15SM,
N15HS and N15HM for installing external devices such as a connector box.
Model T-groove size
N10SS, N10SM M3
N15SS, N15SM, N15HS N15HM M4
If you are using a wiring kit, install a connector box using these T-slots.
T-slots can also be used for other purposes, such as installing sensors or securing cables.
The T-slot dimensions are specified below.
x Use of square nuts is recommended in T-slots, but hex nuts can also be used.
x When installing an object using T-slots, select bolts of an appropriate length so that the tip of the bolt will
not contact the bottom of the T-slot.
z N10SS, N10SM z N15SS, N15SM, N15HS N15HM