IAI America ZR-M - Manual (Page 29)

15
8. Installation Environment, Storage Environment
8.1 Installation Environment
Install the unit in an environment meeting the conditions listed below.
 Not be exposed to direct sunlight.
 Be free from irradiating heat coming from a heat treatment furnace or other equipment that generates a
large amount of heat.
 Have surrounding air temperature of 0 to 40°C.
 Have humidity of 85% or below (non-condensing).
 Be free from corrosive or flammable gases.
 Be free from excessive dust and suitable for normal assembly work.
 Be free from oil mist or cutting oil.
 Be free from chemicals such as sulfuric acid and hydrochloric acid. (Chemical resistance is not
considered in the design of this product.)
 Be free from impact or vibration.
 Be free from strong electromagnetic waves, ultraviolet light or radiation.
In general, the unit should be used in an environment where the operators can work without wearing any
protective equipment or gear.
8.2 Storage Environment
 The storage environment should basically conform to the installation environment.
 If the unit is to be stored for an extended period of time, provide appropriate measures to prevent dew
condensation.
 The unit is not packed with drying agent, unless otherwise specified by the user. If the unit is to be stored
in an environment where dew condensation may occur, take appropriate measures to protect the entire
package, or the unit itself (after unpacking it), from the detrimental effects of dew condensation.
 The unit can withstand a surrounding air temperature of up to 60C for a short period. If the unit must be
stored for over a month, keep the surrounding air temperature at 50
C or below.