SecurityMan iCamDVR (early 2008 shipment) - Manual (Page 62)

Figure 111 - RPb Playback Controls
Figure 110 - Datetime RPb Search
61 | SecurityMan
Using RPb (Remote Playback)
After a successful login with RPB remote software, click
on the “Choose date and time that you would
like to playback!” button to retrieve record files by Date/
Start Time/ end Time to playback as illustrated below in
figure 110.
In the search Datetime window select a desire Date, Start
Time and end Time to retrieve and click oK. And the new
selected search Date, Start Time and end Time will dis-
play in the lower left hand corner of the RPB window as
shown here in figure 111.
The selected search date/time will not playback immedi-
ately after record files is retrieved and the oK is clicked,
there are two methods to start the playback after the
selected date/time search and they are as follow:
After the date/time search, the first method is to playback
all the record files search from Start Time to
end Time. To
accomplish the first method as illustrated above in figure
111, simply click on the button to start to playback
aLL the record files from the Start Time to end Time. The
RPB in playback interface mode looks like figure 112 be-
low. Notice the button is grayed out during playback
mode.
NoTICe
The Date, Start Time & End Time search affects or used ac-
countable in Event Browse.