SecurityMan iCamDVR (early 2008 shipment) - Manual (Page 35)

Figure 49 - PTZ configuration panel
Figure 50 - P.T.Z Protocol Configuration
34 | SecurityMan
the Protocol of the PTZ camera from the drop down list
according to the type/brand of camera that is currently
connected to iCamDVR unit. The current supported PTZ
protocols are as follow; Null, Lilin, Minking, Neon, PelcoD,
PelcoP, Star, Vido, and VISCA. Next is to select the Serial
Port such as COM2, COM3, etc. for P.T.Z serial port from
which the computer assigns for the port. Finally to match
the address of the PTZ camera, every PTZ protocol cam-
eras has an address assigned to identify the camera. If the
camera address is 1 be sure to input in a 1 in the Address
field. See below for relative explanations.
Relative definitions:
Channels List – select the camera channel that 1.
contain PTZ camera.
Protocol – PTZ device communication protocol. 2.
Serial Port – A serial COM port the computer 3.
assigns and uses to communicate with the PTZ
protocol camera.
Address - PTZ device communication address, a
4.
unique ID address uses to identify the PTZ proto-
col camera.
Serial Port Setting
After the Protocol configuration is completed, advance to
the Serial Port Setting as illustrated below in figure 51. Se-
rial port setting is essentially a configuration to allow the