SecurityMan iCamDVR (early 2008 shipment) - Manual (Page 61)

Figure 107 - RPb Interface
Figure 108 - Config Parameter
Figure 109 - SuperDVR Login using RPb
60 | SecurityMan
Then the RPB (Remote Playback) main interface will auto-
matically appear as shown below in figure 107:
Before login, click on the Configuration button to
access the Config Parameter window as illustrated in figure
108 below:
Configuration Parameter consists of Remote Server IP in-
put, IP Port assigned to RPB and Record Save Path. Where
remote sever is the IP address of the hosting computer, IP
port is the RPB assigned communication port, and save
path can be changed to another desired path. After con-
figuration parameter is confirmed, click on OK to exit out
of Config or click Cancel to exit at anytime.
RPb Login
Click on the Login button and input User Name,
Password and then click on the to login into SuperDVR via
RPB (Remote Playback) software as illustrated below in
figure 109.
NoTICe
The default User Name is SYSTEM and the password is blank
(w/o password)..