Fairbanks PC2250 Utility Software - Manual (Page 33)

Section 6: Printers
6/12 33 51214 Rev. 7
Okidata 420 Form Printer
The FB2250 should be programmed for RS 232, 9600 baud, 8 data bits, and 1 stop
bit. The OUTPUT setting should be “BUTTON” for the Print key.
To change Menu Settings:
1. To enter MENU MODE, press and hold the SHIFT key while pressing the SELECT
key. The “MENU” legend will be illuminated while in the menu mode.
2. With the printer in the Menu Mode, press PRINT to print the complete menu. The
current default settings print out. It is recommended to use tractor fed paper.
NOTE: The printed menu selections are different for each emulation mode.
3. Press GROUP to select the relevant group that needs to be changed (the group is
the left-hand column on the Menu printout).
4. Press ITEM to select the relevant item within the selected group (the Item is the
center column on the Menu printout).
5. Press SET to cycle through the settings available for the item you want to change
(the settings are the right-hand column on the Menu printout).
6. Press and hold the SHIFT key while pressing the SELECT.key exit the Menu
Mode.
Note: If you turn off the printer before exiting the menu mode, any changes will be
lost.