Fairbanks PC2250 Utility Software - Manual (Page 15)

6/12 15 51214 Rev. 7
Section 3: Operation
Front Panel Key Functions
ON/OFF Turns the Instrument on or off.
UNITS
Switches between pre-programmed selectable weight units.
ZERO
Sets the display to zero, programmable: 2% or 100% of capacity.
B/G – NET
Toggles between Gross and Net weights
(only if a tare value has been entered greater than zero)
TARE
automatically tares off displayed weight when key is pressed.
Depending on programmed selection, Tare weight will either:
A.
Be retained for reuse until changed or power is removed, or
B.
Automatically clear when Gross weight returns to Zero.
PRINT
Simple RS232 output when key is pressed.
Operating Procedures
Press the ON / OFF Key for one to two (1 – 2) seconds. The Instrument will display
“888888” followed by a “1234567890” character display moving from right to left,
followed by the revision of software. Upon completing the warm-up, the FB2250 will
either display zero, or it will display the actual weight on the scale.
The Zero function, Tare function, and AZT require the displayed weight to be stable
before these functions will operate. The weight reading is stable if the variation in
weight is less than the programmed bAL range.