Agilent Technologies N5183A MXG - Manual (Page 219)

Agilent N518xA, E8663B, E44x8C, and E82x7D Signal Generators Programming Guide 209
Creating and Downloading Waveform Files
Commands for Downloading and Extracting Waveform Data
Table 5-11 Downloading Encrypted Files for Extraction
Download
Method/Memory
Type Command Syntax Options
SCPI/volatile a
memory
MEM:DATA:UNPRotected "/user/bbg1/securewave/file_name",
MEM:DATA:UNPRotected "SWFM1:file_name",
MEM:DATA:UNPRotected "file_name@SWFM1"
,
SCPI/non- volatile
memory a
MEM:DATA:UNPRotected "/user/securewave/file_name",
MEM:DATA:UNPRotected "SNVWFM:file_name",
MEM:DATA:UNPRotected "file_name@SNVWFM"
,
FTP/volatile
memory b
put /user/bbg1/securewave/
FTP/non- volatile
memory b
put /user/securewave/
a.On the N5182A the :MEM:DATA:UNPRotected command is not required to be able to extract files (i.e. use :MEM:DATA). For more
information, refer to the SCPI Command Reference.
b. See “FTP Procedures” on page 210 .
Table 5-12 Extracting Encrypted Waveform Data
Download
Method/Memory
Type Command Syntax Options
SCPI/volatile
memory MMEM:DATA? "/user/bbg1/securewave/file_name"
MMEM:DATA? "SWFM1:file_name"
MMEM:DATA? "file_name@SWFM1"
SCPI/non- volatile
memory MMEM:DATA? "/user/securewave/file_name"
MMEM:DATA? "SNVWFM:file_name"
MMEM:DATA? "file_name@SNVWFM"
FTP/volatile
memory a
get /user/bbg1/securewave/
FTP/non- volatile
memory a
get /user/securewave/
a. See “FTP Procedures” on page 210 .