Agilent Technologies N5183A MXG - Manual (Page 218)

208 Agilent N518xA, E8663B, E44x8C, and E82x7D Signal Generators Programming Guide
Creating and Downloading Waveform Files
Commands for Downloading and Extracting Waveform Data
SCPI/non- volatile
memory a
MEM:DATA:UNPRotected "/user/waveform/file_name",
MEM:DATA:UNPRotected "/user/markers/file_name",
MEM:DATA:UNPRotected "/user/header/file_name",
MEM:DATA:UNPRotected "NVWFM:file_name",
MEM:DATA:UNPRotected "NVMKR:file_name",
MEM:DATA:UNPRotected "NVHDR:file_name",
MEM:DATA:UNPRotected "file_name@NVWFM",
MEM:DATA:UNPRotected "file_name@NVMKR",
MEM:DATA:UNPRotected "file_name@NVHDR",
FTP/volatile memory b put /user/bbg1/waveform/
put /user/bbg1/markers/
put /user/bbg1/header/
FTP/non- volatile
memory b
put /user/waveform/
put /user/markers/
put /user/header/
a.On the N5182A the :MEM:DATA:UNPRotected command is not required to be able to extract files (i.e. use :MEM:DATA). For more
information, refer to the SCPI Command Reference.
b. See “FTP Procedures” on page 210 .
Table 5-10 Extracting Unencrypted I/Q Data
Download
Method/Memory
Type Command Syntax Options
SCPI/volatile
memory MMEM:DATA? "/user/bbg1/waveform/"
MMEM:DATA? "WFM1:"
MMEM:DATA? "@WFM1"
SCPI/non- volatile
memory MMEM:DATA? "/user/waveform/"
MMEM:DATA? "NVWFM:"
MMEM:DATA? "@NVWFM"
FTP/volatile
memory a
get /user/bbg1/waveform/
get /user/bbg1/markers/
get /user/bbg1/header/
FTP/non- volatile
memory a
get /user/waveform/
get /user/markers/
get /user/header/
a. See “FTP Procedures” on page 210 .
Table 5-9 Downloading Unencrypted Files for Extraction
Download Method/
Memory Type Command Syntax Options