beautypg.com

Teledyne 3010PA - Split architecture percent oxygen analyzer User Manual

Page 31

background image

3 Installation

Model 3010

PA

3-10: Part I

Check the integrity and accuracy of the gas connections. Make
sure there are no leaks.

Check the integrity and accuracy of all electrical connections.
Make sure there are no exposed conductors

Check that sample pressure is between 3 and 40 psig, according
to the requirements of your process.

Power up the system, and test it by performing the following

operations:.

1. Repeat the Self-Diagnostic Test as described in chapter 4, section

4.3.5.