Building and storing a waveform sequence – Agilent Technologies E8267D PSG User Manual
Page 107
Chapter 3
93
Basic Digital Operation
Using the Dual ARB Waveform Player
2.
Create the first waveform segment:
a.
Press
Mode
>
Dual ARB
>
Waveform Segments
>
Load Store
to Store.
b.
Highlight the default segment AUTOGEN_WAVEFORM.
c.
Press
Rename Segment
>
Editing Keys
>
Clear Text
.
d. Enter a file name (for example, TTONE), and press
Enter
>
Store Segment To NVWFM Memory
.
This renames the waveform segment, and stores a copy in non volatile memory.
3.
Generate the second waveform:
a.
Press
Mode
>
Multitone
>
Initialize Table
>
Number Of Tones > 9 > Enter > Done
.
b.
Press
Multitone Off On
to On, then Off.
Remember that a waveform cannot be renamed as a segment while it is in use.
This generates a multitone waveform with nine tones. During waveform generation, the M–TONE
and I/Q annunciators activate. The waveform is stored in volatile memory with the default file
name AUTOGEN_WAVEFORM.
4.
Create the second waveform segment:
Repeat Step 2, giving this segment a descriptive name (for example, MTONE).
Building and Storing a Waveform Sequence
This example shows how to build and edit a waveform sequence using the two waveform segments
created on
. To use a segment in a sequence, the segment must reside in volatile memory; for
information on loading waveform segments from non volatile to volatile memory, see
.
1.
Select the waveform segments:
Define a sequence as one repetition of the two–tone waveform segment followed by one repetition
of the nine–tone multitone waveform segment.
a.
Press
Mode
>
Dual ARB
>
Waveform Sequences
>
Build New Waveform Sequence
>
Insert Waveform
.
b.
Highlight the a waveform segment (for example, TTONE) and press
Insert Selected Waveform
.
c.
Highlight a second waveform segment (for example, MTONE) and press
Insert Selected Waveform
.
d. Press
Done Inserting
2.
Optional: Enable markers as desired for the segments in the new sequence: see
3.
Name and store the waveform sequence to the Catalog of Seq Files in the memory catalog:
a.
Press
Name and Store
.
b.
Enter a file name (for example, TTONE+MTONE).
c.
Press
Enter
.