beautypg.com

Agilent Technologies Quaternary Pump 1100 Series User Manual

Page 85

background image

85

Troubleshooting and Test Functions

Running the Pressure Test

Once the test is started, the pump moves the plungers into the start position.
When the plungers are in position, the user interface prompts you to close
the purge valve, and continue the test.

7

Close the purge valve, select continue on the control module and press Enter
to start the test.

The control module displays a graphical representation of the pressure.
“Evaluating the Results” on page 86 describes the evaluation and
interpretation of the pressure test results.

8

When the test is finished slowly open the purge valve to release the pressure
in the system.