Agilent Technologies Quaternary Pump 1100 Series - Manual (Page 236)

236
Control Module Screens for the Quaternary Pump
Screens available from the Analysis screen
Settings Within the Settings you can change the pump parameters. You have access
to a different set of parameters available through the F1-5 keys. F7 key resets
the pump to default values. F8 opens a window to turn on the pump.
Use the m-key for the context sensitive menu. The Status command pulls up
a monitor screen displaying signals and spectra as programmed. Reset will
load the pump default parameters.
Use F1-key (More). You can enter special pump setpoints.