Exchanging the status light pipe – Agilent Technologies Quaternary Pump 1100 Series User Manual
Page 154
154
Repairing the Pump
Exchanging the Status Light Pipe
Exchanging the Status Light Pipe
When required
If part is broken
Tools required
Screwdriver Pozidriv #1
Part required
Status light pipe 5041-8384
Preparation for this procedure:
❏Remove the front cover and top cover, see “Removing the Top Cover and Foam” on page 128.
1
The status light pipe is clipped into the top
cover.
2
Replace the top cover, see “Replacing the Top
Cover and Foam” on page 156.