Micromod Micro-DCI: 53SL5100B Single Loop Controller - Manual (Page 49)

53SL5100B Single-Loop Controller
INSTRUCTION MANUAL
43
5.3.1 Abbreviated Configuration Tables
Table 5-1 through Table 5-8 are provided as a quick reference source for the contiguration datapoints. These
tables do not have the definition column; therefore, for the initial instrument configuration, Section 4 should be
referenced until each datapoint functionality can be recognized by its title. These tables are provided because
even though the functionality of the datapoints can eventually be recognized by title, the specific datapoint
locations can not always be remembered.
Table 5-2. Analog Input (ANI) Module
Title Symbol
ANI0
Datapoint
ANI1
Datapoint Default
Analog Input (Display
Only)
ANI H000 H001 0
Engineering Span SPAN C256 C257 100
Engineering Zero ZERO C276 C277 0
Digital Filter Index DFILT B269 B270 3
0-5 V lnput NOBIAS L416 L417 0
Square Root Signal SQRT L440 L441 0
Calibrate Zero CIZ B263 B264
Calibrate Span CIS C296 C297
Tag Name AITAG A224 A225 ANI0 ANI1
Engineering Units AIEU A298 A299 Percent
Table 5-3. Analog Output (ANO) Module
Title Symbol
ANO0
Datapoint Default
Analog Output (Display Only) ANO C000 0
0 - 20 mA Output OZBASE L472 0
Calibrate Zero COZ B267
Calibrate Span COS C300
Table 5-4. Contact Input (CCI) Module
Title Symbol
CCI0
Datapoint Default
Contact Input (Display Only) CCI L000 0
Contact Input Invert IINV L264 0
Tag Name CITAG A262 CCI0
Table 5-5. Contact Output (CCO) Module
Title Symbol
CCO0
Datapoint Default
Contact Output (Display Only) CCO L024 0
Contact Output Invert OINV L288 0
Tag Name COTAG A280 CCO0