Real time clock – Liquid Controls SP3000 User Manual

Page 39

REAL TIME CLOCK

The SP3000 has a real time clock and calendar that can be set from the front keypad while the unit is in
the “Setup” mode. The clock cannot be set while in the “Running” mode. The time and date are saved
upon power down: however, there is no battery backup to update the time and date during loss of power.

NOTE:

The time must be in 24 hour format.
Enter hours (00-23) and minutes (00-59) based on 24 hour clock.
Example: 2:32 p.m. must be entered as 14:32 (Decimal point must be entered between
hour and minutes).

Advance “Setup” menu until display indicates:

Sponsler V6.13 MS197
Real time clock?

Select item:
Set time?

Enter time:
Hr. Min?

Enter the correct hour and minutes based on 24 hour clock.
Example: 14 32 (2:32 p.m.)
Press

Select item:
Set date?

Enter date:
Mo. Da. Yr. ?

Enter the correct date in the format: Month (1-12). Date (1-
31). Year (00-99) Example: 4 23 92 (April 23,
1992)
Press

Sponsler V6.13 MS197
Serial Interface?

The unit will automatically advance to the next menu item.

NOTE:

Bad Time value
Push to continue

Error messages indicating that the numerical value
entered is invalid.

Bad Date value
Push to continue

Syntax error
Push to continue

Error message indicating that the numerical values
are not entered in the correct format.

ENT