beautypg.com

3 accessory items – Controlled Products Systems Group 6050-080 User Manual

Page 50

background image

Page 40

The following accessory items are available for the model 6050 and 6100 swing gate operators.

Contact Sensors

Contact sensors for use as a secondary entrapment protection device.
Miller Edge, Inc., MGO20, MGR20, MGS20

Photo Cell

Non-contact (photo-cells) sensors for use as a secondary entrapment
protection device.
EMX Industries, Inc., Model IRB-325
MMTC, Inc., Model E3K-R10K4-NR

Loop Detector

Detectors plug directly into ports on circuit board simplifying wiring.
P/N 9405-010 - Single channel detector
P/N 9406-010 – Two-channel detector

Magnetic Lock

Magnetic lock provides an excellent means to secure swing gates and is
a fail-safe device allowing emergency vehicle access upon power
outage.
DoorKing DKGL-S12-1 and DKGL-S12-1L

Control Station

Three button interior and exterior control stations provide manual open-
close-stop gate operation. P/N 1200-006

M/S Cable

Master / slave wire cable contains all the necessary wires to interconnect
master / slave operators.
Cable length 30 feet. P/N 2600-755
Cable length 40 feet. P/N 2600-756
Cable length 50 feet. P/N 2600-757

Time Clock

7 day and 365 day time clocks can be used to automatically open gate at
pre-set time and days. Compact clock fits inside the operator.
P/N 2600-791 - 7 day clock P/N 2600-795 - 365 day clock

Torsion Rods

Torsion rod assembly is used on uphill swing gates for counter balance.
P/N 1203-083

Hinges

Heavy-duty ball bearing hinges provide easy swing gate operation.
P/N 1200-009 - Two required.

Surge Devices

High and low voltage surge suppressers help prevent circuit board failure
caused by lightning strikes and power surges.
P/N 1876-010 - High Voltage, P/N 1878-010 - Low Voltage

Moly D Grease

Molybdenum Disulfide (Moly D) multi-purpose grease for worm gear.
P/N 2600-770 - 14 oz. tube

Base Plate

Optional base plate is used to pad mount the operators equipped with
mounting posts. P/N 2600-644

Gate Scale

Use to test torque required to move gate. P/N 2600-225

Speed Bumps

Prefabricated six-foot speed bump reduces traffic speed through gate
system. P/N 1610-150

5.3 ACCESSORY

ITEMS

This manual is related to the following products: