Controlled Products Systems Group 6050-080 - Manual (Page 27)

Page 17
2.2.1 RADIO RECEIVER WIRING
• Connect the radio receiver to the master
operator as shown in Figure 26. If
operators with battery backup are being
used, refer to the supplemental manual
(p/n 2340-065) for radio receiver wiring
options.
• Power available at terminal 7 is limited to
250ma at 24 VAC. Do not power any
other device from this terminal.
• If other control devices are used, they
must be powered with their own power
supply.
7
11
20
Radio Power
Relay
Common
4502 Board Control
Terminal Strip
Figure 26