CONTREX MLP-Drive - Manual (Page 28)

2 - 12
Figure 2-13 Setpoint Select
Setpoint Select (J5 pins 10, 13)
The Master and Follower setpoints
are determined by the Setpoint Select
input combined with the Master /
Follower Input. For access to Master
Control Parameters 1 and 2 and
Follower Control Parameters 3 and 4,
refer to the chart below.
CONTROL
PARAMETER 1 OR 3
CONTROL
PARAMETER 2 OR 4
10
13
J5
Master / Follower
Input Open
Master / Follower
Input Closed
Setpoint Select / Closed Setpoint Select / Open
Master Control Parameter 1 Master Control Parameter 2
Follower Control Parameter 3 Follower Control Parameter 4