CONTREX MLP-Drive - Manual (Page 152)

Glossary - 4
the Follower mode, Offset Mode, Acceleration/Decelera-
tion, Tuning, Alarms, and Jog. The MLP-Drive comes
factory pre-loaded with a complete set of default Control
Parameters.
Data Inquiry Use the Data Inquiry to request the current value for
Parameters (i.e., Control Parameters or Monitor Param-
eters) in serial communications.
Deceleration Time See Appendix C;CP-17.
Dedicated Keys The Setpoint key and the Tach key are shortcut keys. The
Setpoint key accesses the active setpoint variable directly
and the Tach key accesses the tach variable directly
(rather than manually entering the Code Parameter).
Derivative See Appendix C; CP-67.
Digital Motor Drive A precision motor drive that uses digital compensation
technology.
Direct Mode In the Direct mode of operation, the drive output from the
MLP-Drive that is connected to the motor can be set
directly. Direct mode is an open-loop mode of operation.
Scaling, Acceleration/Deceleration, and closed loop
compensation (PID) software are not involved in the Direct
mode. The Direct mode is used in conjunction with the
Run and Stop controls.
Direct Enable See Appendix C; CP-61
Direct Setpoint See Appendix C; CP-06
Display Test Tests the LED Display Panel Segments.