Clear-Com BS850 (Last time buy) - Manual (Page 30)

Monitor Displays
Monitor displays provide input/output levels and input level adjustments for all devices connected to the
base station.
Monitors Audio Levels at Base Station Inputs:
Select the desired input source, then move the
curser to the bar at the top of the screen. Use the
control knob to adjust the audio input level from
the selected source in 1.5dB increments.
Monitors Audio Levels at Base Station Outputs:
Use the up/down arrow button to view the output
level from the DSP of the desired output to be
monitored.
Information Displays
Information displays provide information about the base station and its current configuration settings file,
and testing capability for transmitter and receiver sub carriers.
The File number displayed is for current
configuration settings. It was the settings file
being used the last time the base station was
turned off, or the last settings file you saved since
the base station was turned on.
This is the file that will be used the next time
the base station power is turned on.
Base station firmware version number and date
are displayed.
DSP firmware version number is displayed.
27